mail.gif (24433 ×Ö½Ú) Logo.gif (14816 ×Ö½Ú)
PROFILE

PRODUCTS
Ball bearings
Insert bearings            One-way bearings            Water pump bearings       Tapered roller bearings      Air-conditioning bearings  Cylindrical roller bearings Clutch release bearings  Wheel hub bearings      Thrust ball bearings  Miniature bearings     Special bearings      

ENGINEERING INFORMATION
Materials
Clearance
Tolerance
Vibration

CONTACT


home.gif (1587 ×Ö½Ú)


     
ENGINEERING INFORMATION ¡¡ ¡¡ ¡¡ ¡¡
I. MATERIALS
  • RINGS & BALLS-Peak Bearing uses homemade or imported vacuum degrassed, high-carbon, chromium bearing steel as its standard material for precision bearing rings and balls. Table 1 below shows the chemical composition.

Table 1             HIGH CARBON CHROMIUM BEARING STEEL       £¨units:%£©

Spec.No Symbol C S1 Mn P S Cr Ni Mo
CHINA YJZ-84 GCr15 0.95-1.05 0.15-0.35 0.20-0.40 ¡Ü0.027 ¡Ü0.02 1.03-1.65 ¡Ü0.025 -
KOREA KS D 3525 STB 2 0.95-1.10 0.15-0.35 ¡Ü0.50 ¡Ü0.025 ¡Ü0.025 1.30-1.60 ¡Ü0.25 ¡Ü0.08
STB 3 0.95-1.10 0.40-0.70 0.9-1.15 ¡Ü0.025 ¡Ü0.025 0.90-1.20 ¡Ü0.25 ¡Ü0.08
STB 4 0.95-1.10 0.15-0.35 ¡Ü0.50 ¡Ü0.025 ¡Ü0.025 1.30-1.60 ¡Ü0.25 0.10-0.25
JAPAN JIS G 4805 SUJ 1 0.95-1.10 0.15-0.35 ¡Ü0.50 ¡Ü0.025 ¡Ü0.025 0.90-1.20 ¡Ü0.25 ¡Ü0.08
SUJ 2 0.95-1.10 0.15-0.35 ¡Ü0.50 ¡Ü0.025 ¡Ü0.025 1.30-1.60 ¡Ü0.25 ¡Ü0.08
SUJ 3 0.95-1.10 0.40-0.70 0.90-1.15 ¡Ü0.025 ¡Ü0.025 0.90-1.20 ¡Ü0.25 ¡Ü0.08
SUJ 4 0.95-1.10 0.15-0.35 ¡Ü0.50 ¡Ü0.025 ¡Ü0.025 1.30-1.60 ¡Ü0.25 0.10-0.25
SUJ 5 0.95-1.10 0.40-0.70 0.90-1.15 ¡Ü0.025 ¡Ü0.025 0.90-1.20 ¡Ü0.25 0.10-0.25
U.S.A.AISI SAE J405 E 51100 0.98-1.10 0.20-0.35 0.25-0.45 ¡Ü0.025 ¡Ü0.025 0.90-1.15 ¡Ü0.25 ¡Ü0.08
E 52100 0.98-1.10 0.20-035 0.25-0.45 ¡Ü0.025 ¡Ü0.025 1.30-1.60 ¡Ü0.25 ¡Ü0.08
Germany VDEH(German lron & Steel Associatiobn) 105 Cr 2 1.00-1.10 0.15-0.35 0.25-0.40 ¡Ü0.030 ¡Ü0.025 0.40-0.60 - -
105 Cr 4 1.00-1.10 0.15-0.35 0.25-0.40 ¡Ü0.030 ¡Ü0.025 0.90-1.15 - -
105 Cr 6 0.90-1.05 0.15-0.35 0.25-0.40 ¡Ü0.025 ¡Ü0.020 1.40-1.65 - -
100 CrMn 6 0.90-1.05 0.50-0.70 1.00-1.20 ¡Ü0.025 ¡Ü0.020 1.40-1.65 - -
  • RETAINERS-Our standard bearing retainers are made from quality cold rolled carbon steel. Nylon or brass are available upon request.
  • SEALS & SHIELDS-Our shields also employ quality carbon steel as standard. We uses a variety of high temperature operation and compatibility with grease. Buna-Nitrile is the standard material used.
  • LUBRICANTS-Our common greases used and their features shown in Table 2.

Table 2                 GREASE   

MFGER    BRAND THICKER BASE OIL DROPPING

POINT

¡¡ TEMP. Our CODE

ESSO

Beacom325

Lithium Diester 193 290 ¡¡ L06

AC205

Natrium Mineral ¡¡ ¡¡ -60~+120 ¡¡

Andok B.

Natrium Mineral 260 280 -25~+120 L01

Andok C

Natrium Mineral ¡Ý260 205 -40~+120 L02

Andok 260

Natrium Mineral 200 250 -20~+150 L07

Kyodo Yushi

Multemp PS2 Lithium

Diester

189 280 -50~+110 L20
Multemp SRL Lithium

Ester

191 245 -40~++150 L21
Multemp SC-A Urea ¡¡ 260 280 0~+160 ¡¡
Multemp ETISO Urea Mineral 260 280 -10~+160 ¡¡

KLüber

Staburags NBU12

Barium

Mineral

220 270 -35~+150 ¡¡
¡¡

Isoflex NBU15

Barium

Diester Mineral

220

280

-60~+130

¡¡
¡¡ Asonic Gly32 Lithium Sythetic ¡¡ ¡¡ -50~+140 ¡¡
¡¡ Asonic GHY72 Polyhamstoff Ester ¡¡ ¡¡ -40~+180 ¡¡
¡¡

Unisilikon TK44N2

Na-Komplex

Silicone

¡¡ ¡¡

-60~+230

¡¡

Dow Corning

Molykote 33M

Lithium Silicone     210 260

-70~+180

¡¡

Molykote 44M

Lithium Silicone

204

260 -40~+200 ¡¡

Molykote 55M

Lithium Silicone ¡¡ ¡¡ -55~+165 ¡¡

Molykote FS3451

Fluorotelomer Phlorosilicone ¡Ý260 285 -40~+230 ¡¡

Shell

Alvania No.2 Lithium

Mineral

182 272 -25~+120

L15

Alvania No.3 Lithium

Mineral

183 233 -20~+135 L16
Alvania RS Lithium

Mineral

183 252 -25~++120 ¡¡
Dolium R ¡¡ Mineral 238 281 -20~+140

¡¡

Aero shell No.5 Microgel Mineral ¡Ý260 282 -10~+130

L40

Aero shell No.7 Microgel Diester ¡Ý260 288 -70~+150

L42

Aero shell No.15A Flaorotelomer

Silicone

¡Ý260 280 -70~+260 ¡¡

Mobil Oil

Mobilux 2

Lithium

Mineral

190 280 -20~+130 ¡¡

Mobilgrease 22

Lithium

Diester Mineral

192

274

-50~+140

L09
Mobilgrease 28 Bentonite Sythetic hydrocarbon ¡Ý260 280 -60~+180

¡¡

Mobilplex 47 ¡¡ Mineral ¡Ý260 280 -20~+120 ¡¡

Du Pont

Krytox 240AC

Fluorotelomer

Fluorinated

¡¡ 282 -35~+290 ¡¡

Krytox 283AC

Fluorotelomer

Fluorinated

¡¡

229

-35~+290

¡¡

Krytox 143AC

Fluorotelomer

Fluorinated

¡¡

¡¡

-35~+290

¡¡

Caltex

Chevron SRI-2

Urea

Mineral

¡¡

293

-30~+175

L19

Anderol L-793A

Lithium

Diester

¡¡

¡¡

-60~+150 ¡¡

                        

BACK TO TOP
II. TOLERANCE
Bearing tolerance includes dimensional tolerance and revolving tolerance. Dimensional tolerance is a request when bearings are mounted on shafts or in housings. It includes bore/outerside diameter deviation from basic, inner ring/outer ring width deviation from basic and radius allowance . Geometric tolerance includes bore/outside diameter deviation in single plane, inner ring/outer ring width deviation in single radial plane. Revolving tolerance includes radial and axial runout of assembled bearing inner ring and outer ring, inner ring reference face runout with bore and outside cylindrical surface runout with outer ring reference face.

Tolerance class ranges from common class 0 to 6,5,4 and 2,from low to high. Table 3 below is the tolerance class stipulated in Chinese GB307 standard and its comparison with some other standards.

Table 3              COMPARISON OF TOLERANCE CLASS                

Nationality Standard Number Preision grade
Chinese GB307 0(G) 6E 5(D) 4(C) 2(B)
ISO ISO492 0 6 5 4 2
Sweden Version 1985 0 P6 P5 P4 P2
West Germony DIN 620/2 Po P6 P5 P4 P2
U.S.A ANSI B3.14 ABEC1 ABEC3 ABEC5 ABEC7 ABEC9
Japan JIS B1514 0 6 5 4 2
The standard manufacturing tolerance for our precision radial bearings is class 6, as shown in Table 4.
BACK TO TOP

Table 4                          INNER RING                             

d
mm
¡÷ dmp Vdp Vdmp Kia ¡÷ BS VBS
Diameter series all normal
9 0.1 2.3.4
Over Incl. High Low Max Max Max High Low Max
2.5 10 0 -7 9 7 5 5 6 0 -120 15
10 18 0 -7 9 7 5 5 7 0 -120 20
18 30 0 -8 10) 8 6 6 8 0 -120 20)
30 50 0 -10 13 10 8 8 10 0 -120 20
50 80 0 -12 15 15 9 9 10 0 -150